-
-
13580374608
17092084608
13580374608
17092084608
Product Name: Acrylic emulsion Preparation Date: Apr 28, 2026 Manufacturer: Guangzhou Lianyi Chemical Co., Ltd.
Product Name: Acrylic emulsion F-68 Chemical Category: Styrene-Alkyl Acrylate-Alkyl Methacrylate Polymer Usage: Base Coating Material for Acrylic Sports Courts
Technical Contact: Address: Room 309, No. 27 Fuqian Road, Xintang Town, Zengcheng District, Guangzhou, Guangdong Tel: (86) 20-82038946 | Fax: (86) 20-32038054
| Serial Number | Name | CAS Number | Percentage | Is it a Hazardous Substance? |
|---|---|---|---|---|
| 1. | Polystyrene-Acrylate Polymer | 25085-34-1 | 43% | No |
| 2. | Additives | - | 1% | No |
| 3. | Water | - | 56% | No |
| Hazardous Components: None (Free formaldehyde and VOC not detected, compliant with GB 30981-2020 standard). |
GHS Classification: Non-hazardous chemical (based on "Hazardous Chemicals Catalog (2022 Edition)"). Warning Word: None.
Main Hazards: May cause slight irritation upon eye contact; No flammability, toxicity, corrosiveness, or other hazardous properties.
Preventive Measures: Avoid direct eye contact and maintain ventilation during operation.
Eye Contact: Rinse eyes thoroughly with plenty of running water for at least 15 minutes. Seek medical advice if irritation persists.
Skin Contact: Remove contaminated clothing. Wash skin with plenty of running water. Seek medical help if irritation occurs.
Inhalation: Remove victim to fresh air. Keep respiratory tract unobstructed. Seek medical assistance for discomfort.
Ingestion: Rinse mouth. Do not induce vomiting without medical instruction. Seek medical attention.
Flammability: Non-flammable, water-based system is difficult to burn. Hazardous Characteristics: High-temperature decomposition may release small amounts of styrene vapor (low concentration is non-hazardous). Extinguishing Media: Water, foam, or dry powder fire extinguishers can be used to put out surrounding fires. Special Warning: No special fire-fighting requirements; firefighters should wear regular protective equipment.
Small-Scale Leakage: ① Absorb with inert materials such as sand or activated carbon, and collect into a sealed container; ② Clean the contaminated area with soapy water, and drain the wastewater into the sewage treatment system.
Large-Scale Leakage: ① Designate a warning area to prevent unauthorized personnel from entering; ② Transfer to a special collection tank using a pump, and hand it over to a qualified disposal agency.
Environmental Protection Requirements: Prohibit discharging leakage into stormwater pipes or natural water bodies, and comply with GB 8978-1996 emission standards.
Handling Precautions: Avoid mixing with strong oxidants, strong acids/bases; Wear safety goggles and nitrile gloves during operation, and maintain good ventilation; Prohibit eating, drinking, or smoking in the work area.
Storage Requirements: Temperature: 5℃-40℃ (avoid freezing or high-temperature degradation); Environment: Cool and dry place, sealed container, away from heat sources; Shelf Life: 12 months when stored unopened.
| Exposure Route | Protection Measures |
|---|---|
| Eyes | Wear safety goggles with side shields (EN 166 standard). |
| Skin | Wear anti-contamination work clothes and chemical-resistant gloves (such as nitrile gloves). |
| Respiration | No protection needed under normal operation; wear a dust mask (GB 2626-2019) in high-concentration mist environments. |
| Occupational Exposure Limits | No known national standards; it is recommended to keep the operation environment ventilated. |
Stability: Stable under normal temperature and pressure; avoid high temperatures (＞50℃) or freezing. Incompatible Substances: Strong oxidants (such as potassium permanganate), strong acids (such as sulfuric acid), strong bases (such as sodium hydroxide). Polymerization Hazard: No polymerization risk.
Acute Toxicity: Skin Contact: Rabbit skin irritation test showed no irritation (OECD 404); Inhalation: Rat inhalation LC50＞5000 mg/m³ (no data, referenced from similar polymers); Oral Ingestion: Rat LD50＞2000 mg/kg (no data, referenced from non-toxic polymers).
Long-Term Effects: No carcinogenic, teratogenic, or mutagenic effects (no relevant research data).
Environmental Hazards: Non-bioaccumulative and biodegradable (referenced from OECD 301B test); Disposal Recommendations: Avoid direct discharge into water bodies; treat as industrial wastewater (comply with GB 31572-2015).
Waste Type: General industrial solid waste (not hazardous waste); Disposal Methods: ① Hand over to a qualified industrial waste treatment agency (comply with GB 18599-2020); ② Cleaned waste containers can be recycled; do not discard them randomly.
Transport Category: Non-hazardous goods (UN number: none); Packaging Requirements: Sealed packaging in plastic or iron barrels to prevent leakage; Transport Precautions: Avoid exposure to sunlight and rain, handle with care, and transport separately from oxidants.
Applicable Regulations: "Work Safety Law of the People's Republic of China" (2021 Revision); "Emission Standard of Air Pollutants for Coatings, Inks and Adhesives Industries" (GB 37824-2019); "Regulations on the Safety Management of Hazardous Chemicals" (not applicable, as this product is non-hazardous).
Notes: This SDS is compiled based on existing technology and regulations and does not constitute a product performance guarantee. Users should test safety according to actual working conditions. If components or regulations change, this document must be updated in a timely manner.
Compiling Unit: Technical Department of Guangzhou Lianyi Chemical Co., Ltd. Revision Record: Second release (Apr 28, 2026).
